NEW Smart HD 720P Wireless WIFI IP Camera Outdoor Security Alarm Night Vision
Plug & Play (P2P), No Need DDNS, No Need Port Forwarding.
Setting No Need PC. You Can Easily Realize All The Function Via The APP.
Support Max 64GB Micro SD Card Recording (Micro SD Card Must Be FAT32 File System Format), Support Remote Playback.
Motion Detection Alarm,Whistle Alarm.
WiFi Setup, Unplug The Ethernet Cable. All Setup Are Via Phone APP.
Remote View By Mobile Device Including Android, IPhone, IPad And PC.
Notice: Does NOT Support 5G Wifi.
Size: 110 x 65mm
Camera lens material: High Definition Optical Glass Lens
CPU: GM8135S + SC1045
Operating System: Embedded LNUX OS
Sensor: 1/4 " CMOS 1.0 Megapixel
Video Format: HD(1280 x 720P) VGA(640 x 480)
Image Compression: H.264/MJPEG
Lens Standard : 3.6mm
Rotation Angle: Tilt: 100°/Pan:360º(Can not work By App,Just Work Manually)
Minimum Illumination(Lux): 0.1 Lux / F1.2 (With IR Illuminator)
Frame Rate: 1-30FPS
Wireless Standard: WIFI, 802.11b/G/N
Memory: TF Card
Input / Output: Supports Two-Way Audio, Built-In Mic, Speaker
Playback: Support Remote Playback.
Record Mode: Continuous Record, Alarm Record
Motion Detection: Support
Alarm Type: Apps Alarm,Local Alarm,
Data Transfer Interface: USB 2.0
Supported Mobile System: Above IPhone IOS 7.0 / Android 4.3
Supported Operating Systems: Windows XP,Windows 7,Windows 8
Power Consumption: DC5V,1A
Q1. Is it Hard to Connect?
A: This camera have Plug to Play (P2P) function, just plug in power and follow some steps then everything will setup very well.
Q2. Is the IOS APP and Android APP the same function?
A: The IOS OS system due to it's syetem limit, the APP will miss some less important function than Android, but don't worry, the APP will upgrade every vision, so the function will almost the same.
Q3. When I use two way audio function, what I hear some noise?
A: Please put the camera away from other Electronic device, it will have Signal interference. And it is normal situation please don't worry.
Q4. Does this camera support night vision?
A: Yes, when the camera IR sensor detect not enough light, the IR LED will turn on and switch to night vision model.
Q5. I can't connect the camera to WIFI ?
A: Please make sure the first time connect your phone and camera at the same network system. If still hard to connect we have tech team to support you.
Q6. Does the alarm information will always keeping ?
A: The alarm information will record on Micro SD Card. Also show on mobile device, once you read it then will remove the phone alarm information. Please save the alarm photos to your phone.
Q7. Does this camera support Onvif and support connect to NVR?
A: The camera use its' Own design software, because the camera mainly focus on phone remote monitoring, so far it is not support Onvif.
1 X Wifi Camera (Not Include The Memory Card)
1 X USB Cable
1 X User Manual
1 X Fixed Packages
1 X Adapter (US)